[    1.426034] ata10: SATA link down (SStatus 0 SControl 300)
[    1.549754] tsc: Refined TSC clocksource calibration: 3000.000 MHz
[    1.597719] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.598877] ata9.00: ATA-8: ST3500418AS, CC46, max UDMA/133
[    1.598882] ata9.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.600273] ata9.00: configured for UDMA/133
[    1.757615] usb 2-7: new high-speed USB device number 2 using ehci-pci
[    1.890091] usb 2-7: New USB device found, idVendor=1a40, idProduct=0101
[    1.890097] usb 2-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.890100] usb 2-7: Product: USB 2.0 Hub
[    1.890451] hub 2-7:1.0: USB hub found
[    1.890556] hub 2-7:1.0: 4 ports detected
[    1.901374] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.901621] ata4.00: ATA-8: PLEXTOR PX-256M5S, 1.03, max UDMA/133
[    1.901627] ata4.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.902140] ata4.00: configured for UDMA/133
[    1.902473] scsi 3:0:0:0: Direct-Access     ATA      PLEXTOR PX-256M5 1.03 PQ: 0 ANSI: 5
[    1.902686] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.902706] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.902914] sd 3:0:0:0: [sda] Write Protect is off
[    1.902921] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.903031] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.903422]  sda: sda1 sda2 sda3
[    1.904694] sd 3:0:0:0: [sda] Attached SCSI disk
[    2.001313] usb 2-8: new high-speed USB device number 3 using ehci-pci
[    2.135367] usb 2-8: New USB device found, idVendor=0bda, idProduct=8178
[    2.135372] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.135376] usb 2-8: Product: USB WLAN
[    2.135379] usb 2-8: Manufacturer: 802.11n
[    2.135382] usb 2-8: SerialNumber: 00e04c000001
[    2.373009] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[    2.392936] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.394097] ata5.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[    2.394102] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.395433] ata5.00: configured for UDMA/133
[    2.395794] scsi 4:0:0:0: Direct-Access     ATA      ST31000528AS     CC38 PQ: 0 ANSI: 5
[    2.396045] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.396050] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.396211] sd 4:0:0:0: [sdb] Write Protect is off
[    2.396214] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.396396] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.419298]  sdb: sdb1
[    2.419308] sdb: p1 size 3907033088 extends beyond EOD, enabling native capacity
[    2.419974]  sdb: sdb1
[    2.419976] sdb: p1 size 3907033088 extends beyond EOD, truncated
[    2.420279] sd 4:0:0:0: [sdb] Attached SCSI disk
[    2.549132] Switched to clocksource tsc
[    2.564284] usb 3-2: New USB device found, idVendor=04d9, idProduct=2517
[    2.564290] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.622810] hidraw: raw HID events driver (C) Jiri Kosina
[    2.728302] usbcore: registered new interface driver usbhid
[    2.728303] usbhid: USB HID core driver
[    2.729544] input: HID 04d9:2517 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3
[    2.729617] hid-generic 0003:04D9:2517.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:2517] on usb-0000:00:1a.0-2/input0
[    2.729814] input: HID 04d9:2517 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input4
[    2.729902] hid-generic 0003:04D9:2517.0002: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:2517] on usb-0000:00:1a.0-2/input1
[    2.856532] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    2.884451] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.885610] ata6.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[    2.885616] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.886947] ata6.00: configured for UDMA/133
[    2.887310] scsi 5:0:0:0: Direct-Access     ATA      ST31000528AS     CC38 PQ: 0 ANSI: 5
[    2.887556] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.887586] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    2.887610] sd 5:0:0:0: [sdc] Write Protect is off
[    2.887612] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.887639] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.904539]  sdc: sdc1
[    2.905324] sd 5:0:0:0: [sdc] Attached SCSI disk
[    3.029284] usb 4-1: New USB device found, idVendor=0a12, idProduct=0001
[    3.029289] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.029293] usb 4-1: Product: CSR8510 A10
[    3.268139] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[    3.375961] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.376785] ata7.00: ATA-8: ST3000DM001-1CH166, CC44, max UDMA/133
[    3.376790] ata7.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.377725] ata7.00: configured for UDMA/133
[    3.378072] scsi 6:0:0:0: Direct-Access     ATA      ST3000DM001-1CH1 CC44 PQ: 0 ANSI: 5
[    3.378344] sd 6:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[    3.378347] sd 6:0:0:0: [sdd] 4096-byte physical blocks
[    3.378365] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    3.378387] sd 6:0:0:0: [sdd] Write Protect is off
[    3.378390] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    3.378423] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.448352]  sdd: sdd1 sdd2
[    3.448850] sd 6:0:0:0: [sdd] Attached SCSI disk
[    3.518275] usb 5-2: New USB device found, idVendor=04d9, idProduct=0174
[    3.518280] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.518283] usb 5-2: Product: USB Keyboard
[    3.561425] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input5
[    3.561773] hid-generic 0003:04D9:0174.0003: input,hidraw2: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:1a.2-2/input0
[    3.655331] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input6
[    3.655687] hid-generic 0003:04D9:0174.0004: input,hidraw3: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:1a.2-2/input1
[    3.768780] usb 11-2: new SuperSpeed USB device number 2 using xhci_hcd
[    3.813300] usb 11-2: Parent hub missing LPM exit latency info.  Power management will be impacted.
[    3.819610] usb 11-2: New USB device found, idVendor=2109, idProduct=0811
[    3.819616] usb 11-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.819619] usb 11-2: Product: 4-Port USB 3.0 Hub
[    3.819622] usb 11-2: Manufacturer: VIA Labs, Inc.
[    3.820992] hub 11-2:1.0: USB hub found
[    3.821895] hub 11-2:1.0: 4 ports detected
[    3.867488] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.867781] ata8.00: ATA-7: INTEL SSDSA2M120G2GC, 2CV102M3, max UDMA/133
[    3.867786] ata8.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    3.868128] ata8.00: configured for UDMA/133
[    3.868487] scsi 7:0:0:0: Direct-Access     ATA      INTEL SSDSA2M120 2CV1 PQ: 0 ANSI: 5
[    3.868673] sd 7:0:0:0: Attached scsi generic sg5 type 0
[    3.868730] sd 7:0:0:0: [sde] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    3.868762] scsi 8:0:0:0: Direct-Access     ATA      ST3500418AS      CC46 PQ: 0 ANSI: 5
[    3.868835] sd 8:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    3.868836] sd 7:0:0:0: [sde] Write Protect is off
[    3.868838] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    3.868843] sd 8:0:0:0: Attached scsi generic sg6 type 0
[    3.868854] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.868867] sd 8:0:0:0: [sdf] Write Protect is off
[    3.868869] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[    3.868881] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.869185]  sde: sde1 sde2 sde3
[    3.869570] sd 7:0:0:0: [sde] Attached SCSI disk
[    3.915059]  sdf: sdf1 sdf2 sdf3
[    3.915929] sd 8:0:0:0: [sdf] Attached SCSI disk
[    3.939561] usb 10-1: new high-speed USB device number 2 using xhci_hcd
[    3.959710] usb 10-1: New USB device found, idVendor=2109, idProduct=0811
[    3.959716] usb 10-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.959720] usb 10-1: Product: USB2.0 Hub
[    3.960828] hub 10-1:1.0: USB hub found
[    3.961600] hub 10-1:1.0: 4 ports detected
[    4.018788] random: nonblocking pool is initialized
[    4.187216] ata12: SATA link down (SStatus 0 SControl 300)
[    4.443075] usb 2-7.1: new full-speed USB device number 4 using ehci-pci
[    4.478765] EXT4-fs (sdf3): INFO: recovery required on readonly filesystem
[    4.478767] EXT4-fs (sdf3): write access will be enabled during recovery
[    4.554575] usb 2-7.1: New USB device found, idVendor=046d, idProduct=c537
[    4.554581] usb 2-7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.554584] usb 2-7.1: Product: USB Receiver
[    4.554587] usb 2-7.1: Manufacturer: Logitech
[    4.557074] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7.1/2-7.1:1.0/input/input7
[    4.557332] hid-generic 0003:046D:C537.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-7.1/input0
[    4.561327] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7.1/2-7.1:1.1/input/input8
[    4.561766] hid-generic 0003:046D:C537.0006: input,hiddev0,hidraw5: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-7.1/input1
[    4.646904] usb 2-7.4: new full-speed USB device number 5 using ehci-pci
[    4.758999] usb 2-7.4: New USB device found, idVendor=046d, idProduct=c21f
[    4.759004] usb 2-7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.759008] usb 2-7.4: Product: Wireless Gamepad F710
[    4.759011] usb 2-7.4: Manufacturer: Logitech
[    4.759014] usb 2-7.4: SerialNumber: B5889CBD
[    4.837387] usb 11-2.3: new SuperSpeed USB device number 3 using xhci_hcd
[    5.090681] usb 11-2.3: Parent hub missing LPM exit latency info.  Power management will be impacted.
[    5.095389] usb 11-2.3: New USB device found, idVendor=2109, idProduct=0812
[    5.095395] usb 11-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.095398] usb 11-2.3: Product: USB3.0 Hub             
[    5.095401] usb 11-2.3: Manufacturer: VIA Labs, Inc.         
[    5.096632] hub 11-2.3:1.0: USB hub found
[    5.097465] hub 11-2.3:1.0: 4 ports detected
[    5.178405] usb 10-1.2: new high-speed USB device number 3 using xhci_hcd
[    5.198549] usb 10-1.2: New USB device found, idVendor=2109, idProduct=0811
[    5.198551] usb 10-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.198552] usb 10-1.2: Product: USB2.0 Hub
[    5.199677] hub 10-1.2:1.0: USB hub found
[    5.200465] hub 10-1.2:1.0: 4 ports detected
[    5.282239] usb 10-1.3: new full-speed USB device number 4 using xhci_hcd
[    5.379099] usb 10-1.3: New USB device found, idVendor=1852, idProduct=7925
[    5.379102] usb 10-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.379103] usb 10-1.3: Product: Audinst HUD-mx1
[    5.379104] usb 10-1.3: Manufacturer: Audinst, Inc.
[    5.391089] input: Audinst, Inc. Audinst HUD-mx1 as /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/usb10/10-1/10-1.3/10-1.3:1.0/input/input9
[    5.391361] hid-generic 0003:1852:7925.0007: input,hidraw6: USB HID v1.00 Device [Audinst, Inc. Audinst HUD-mx1] on usb-0000:04:00.0-1.3/input0
[    5.482054] usb 10-1.2.3: new high-speed USB device number 5 using xhci_hcd
[    5.505494] usb 10-1.2.3: New USB device found, idVendor=2109, idProduct=2812
[    5.505500] usb 10-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.505503] usb 10-1.2.3: Product: USB2.0 Hub             
[    5.505506] usb 10-1.2.3: Manufacturer: VIA Labs, Inc.         
[    5.506700] hub 10-1.2.3:1.0: USB hub found
[    5.507478] hub 10-1.2.3:1.0: 4 ports detected
[    5.747536] EXT4-fs (sdf3): recovery complete
[    5.754717] EXT4-fs (sdf3): mounted filesystem with ordered data mode. Opts: (null)
[    6.878778] init: plymouth-upstart-bridge main process (210) terminated with status 1
[    6.878799] init: plymouth-upstart-bridge main process ended, respawning
[    6.880242] init: plymouth-upstart-bridge main process (224) terminated with status 1
[    6.880249] init: plymouth-upstart-bridge main process ended, respawning
[    6.881353] init: plymouth-upstart-bridge main process (226) terminated with status 1
[    6.881373] init: plymouth-upstart-bridge main process ended, respawning
[    6.882855] init: plymouth-upstart-bridge main process (227) terminated with status 1
[    6.882862] init: plymouth-upstart-bridge main process ended, respawning
[    6.884058] init: plymouth-upstart-bridge main process (229) terminated with status 1
[    6.884078] init: plymouth-upstart-bridge main process ended, respawning
[    6.885461] init: plymouth-upstart-bridge main process (230) terminated with status 1
[    6.885467] init: plymouth-upstart-bridge main process ended, respawning
[    6.886638] init: plymouth-upstart-bridge main process (232) terminated with status 1
[    6.886658] init: plymouth-upstart-bridge main process ended, respawning
[    6.888030] init: plymouth-upstart-bridge main process (233) terminated with status 1
[    6.888037] init: plymouth-upstart-bridge main process ended, respawning
[    6.889102] init: plymouth-upstart-bridge main process (235) terminated with status 1
[    6.889122] init: plymouth-upstart-bridge main process ended, respawning
[    6.890499] init: plymouth-upstart-bridge main process (236) terminated with status 1
[    6.890506] init: plymouth-upstart-bridge main process ended, respawning
[    6.891667] init: plymouth-upstart-bridge main process (238) terminated with status 1
[    6.891687] init: plymouth-upstart-bridge respawning too fast, stopped
[   11.859865] Adding 1000444k swap on /dev/sdf2.  Priority:-1 extents:1 across:1000444k FS
[   11.918498] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.953955] systemd-udevd[337]: starting version 204
[   11.998813] lp: driver loaded but no devices found
[   12.002776] ppdev: user-space parallel port driver
[   12.004866] parport_pc 00:07: reported by Plug and Play ACPI
[   12.004911] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   12.099741] lp0: using parport0 (interrupt-driven).
[   12.100503] [drm] Initialized drm 1.1.0 20060810
[   12.107196] wmi: Mapper loaded
[   12.108472] Bluetooth: Core ver 2.17
[   12.108497] NET: Registered protocol family 31
[   12.108498] Bluetooth: HCI device and connection manager initialized
[   12.108506] Bluetooth: HCI socket layer initialized
[   12.108507] Bluetooth: L2CAP socket layer initialized
[   12.108510] Bluetooth: SCO socket layer initialized
[   12.119583] usbcore: registered new interface driver btusb
[   12.121678] checking generic (ef000000 130000) vs hw (e0000000 8000000)
[   12.121680] checking generic (ef000000 130000) vs hw (ee000000 2000000)
[   12.121681] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[   12.121693] Console: switching to colour dummy device 80x25
[   12.122043] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0e4090a2
[   12.122046] nouveau  [  DEVICE][0000:01:00.0] Chipset: GK104 (NVE4)
[   12.122047] nouveau  [  DEVICE][0000:01:00.0] Family : NVE0
[   12.122840] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   12.122847] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   12.122848] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[   12.138125] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[   12.138130] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.138151] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.183585] type=1400 audit(1413830657.684:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=438 comm="apparmor_parser"
[   12.183591] type=1400 audit(1413830657.684:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=438 comm="apparmor_parser"
[   12.183594] type=1400 audit(1413830657.684:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=438 comm="apparmor_parser"
[   12.183921] type=1400 audit(1413830657.684:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=438 comm="apparmor_parser"
[   12.183925] type=1400 audit(1413830657.684:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=438 comm="apparmor_parser"
[   12.184092] type=1400 audit(1413830657.684:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=438 comm="apparmor_parser"
[   12.229970] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   12.229973] nouveau  [   VBIOS][0000:01:00.0] using image from PROM
[   12.230086] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   12.230089] nouveau  [   VBIOS][0000:01:00.0] version 80.04.31.00.46
[   12.232328] nouveau 0000:01:00.0: irq 49 for MSI/MSI-X
[   12.232337] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[   12.232431] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR5
[   12.232433] nouveau  [     PFB][0000:01:00.0] RAM size: 2048 MiB
[   12.232434] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[   12.237829] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 987500uv
[   12.250269] EDAC MC: Ver: 3.0.0
[   12.251662] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[   12.251689] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[   12.251692] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[   12.261077] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[   12.261084] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[   12.261086] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[   12.261112] nouveau  [     CLK][0000:01:00.0] 07: core 324 MHz memory 324 MHz 
[   12.261145] nouveau  [     CLK][0000:01:00.0] 0a: core 324-862 MHz memory 810 MHz 
[   12.261229] nouveau  [     CLK][0000:01:00.0] 0d: core 540-1306 MHz memory 3004 MHz 
[   12.261333] nouveau  [     CLK][0000:01:00.0] 0f: core 540-1306 MHz memory 3004 MHz 
[   12.261406] nouveau  [     CLK][0000:01:00.0] --: core 324 MHz memory 324 MHz 
[   12.285287] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   12.336694] [TTM] Zone  kernel: Available graphics memory: 8212756 kiB
[   12.336697] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   12.336698] [TTM] Initializing pool allocator
[   12.336701] [TTM] Initializing DMA pool allocator
[   12.336707] nouveau  [     DRM] VRAM: 2048 MiB
[   12.336708] nouveau  [     DRM] GART: 1048576 MiB
[   12.336711] nouveau  [     DRM] TMDS table version 2.0
[   12.336713] nouveau  [     DRM] DCB version 4.0
[   12.336714] nouveau  [     DRM] DCB outp 00: 01000f02 00020030
[   12.336716] nouveau  [     DRM] DCB outp 01: 02000f00 00000000
[   12.336717] nouveau  [     DRM] DCB outp 02: 08011f82 00020030
[   12.336718] nouveau  [     DRM] DCB outp 03: 02822f62 0f420010
[   12.336719] nouveau  [     DRM] DCB outp 05: 04833fb6 0f420010
[   12.336721] nouveau  [     DRM] DCB outp 06: 04033f72 00020010
[   12.336722] nouveau  [     DRM] DCB conn 00: 00001030
[   12.336723] nouveau  [     DRM] DCB conn 01: 00020131
[   12.336724] nouveau  [     DRM] DCB conn 02: 00002261
[   12.336726] nouveau  [     DRM] DCB conn 03: 00010346
[   12.336727] nouveau  [     DRM] DCB conn 04: 00000460
[   12.337889] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.337890] [drm] No driver support for vblank timestamp query.
[   12.339025] Linux video capture interface: v2.00
[   12.343952] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0819)
[   12.357367] input: Generic X-Box pad as /devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7.4/2-7.4:1.0/input/input10
[   12.357440] usbcore: registered new interface driver xpad
[   12.358495] input: UVC Camera (046d:0819) as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input11
[   12.358576] usbcore: registered new interface driver uvcvideo
[   12.358578] USB Video Class driver (1.1.1)
[   12.359428] nouveau  [     DRM] MM: using COPY for buffer copies
[   12.380641] cfg80211: Calling CRDA to update world regulatory domain
[   12.396290] rtl8192cu: Chip version 0x11
[   12.402148] gpio_ich: GPIO from 180 to 255 on gpio_ich
[   12.489901] rtl8192cu: MAC address: 14:cf:92:1f:7d:34
[   12.489904] rtl8192cu: Board Type 0
[   12.490149] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[   12.490169] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[   12.490228] usbcore: registered new interface driver rtl8192cu
[   12.553109] nouveau  [     DRM] allocated 1680x1050 fb: 0x80000, bo ffff880407f75800
[   12.553212] fbcon: nouveaufb (fb0) is primary device
[   12.593897] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   12.594298] rtlwifi: wireless switch is on
[   12.616492] Console: switching to colour frame buffer device 210x65
[   12.617364] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   12.617365] nouveau 0000:01:00.0: registered panic notifier
[   12.617369] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[   12.617533] hda_intel: Disabling MSI
[   12.617542] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   12.617563] hda-intel 0000:01:00.1: Disabling 64bit DMA
[   12.622459] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[   12.628130] cfg80211: World regulatory domain updated:
[   12.628133] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.628134] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.628135] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.628136] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.628138] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.628139] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.852839] usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[   12.852842] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 768/6912/1<6>[   13.106486] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input15
[   13.106540] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input14
[   13.106580] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input13
[   13.106618] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input12
[   13.401533] EXT4-fs (sdf3): re-mounted. Opts: errors=remount-ro
[   13.456388] init: failsafe main process (700) killed by TERM signal
[   13.645856] type=1400 audit(1413830659.148:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=760 comm="apparmor_parser"
[   13.645863] type=1400 audit(1413830659.148:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=760 comm="apparmor_parser"
[   13.646195] type=1400 audit(1413830659.148:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=760 comm="apparmor_parser"
[   13.750074] init: cups main process (761) killed by HUP signal
[   13.750082] init: cups main process ended, respawning
[   13.917655] Bluetooth: RFCOMM TTY layer initialized
[   13.917664] Bluetooth: RFCOMM socket layer initialized
[   13.917668] Bluetooth: RFCOMM ver 1.11
[   13.932743] type=1400 audit(1413830659.432:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=822 comm="apparmor_parser"
[   13.947888] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.947891] Bluetooth: BNEP filters: protocol multicast
[   13.947899] Bluetooth: BNEP socket layer initialized
[   14.689277] init: alsa-restore main process (972) terminated with status 99
[   14.722262] r8169 0000:03:00.0 eth0: link down
[   14.722273] r8169 0000:03:00.0 eth0: link down
[   14.722293] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.722534] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.726510] rtl8192cu: MAC auto ON okay!
[   14.761057] rtl8192cu: Tx queue select: 0x05
[   15.131371] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.131596] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.572307] r8169 0000:03:00.0 eth0: link up
[   17.572315] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.429338] hda-codec: out of range cmd 0:5:707:ffffffbf
[   43.707464] audit_printk_skb: 150 callbacks suppressed
[   43.707466] type=1400 audit(1413801891.596:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2070 comm="apparmor_parser"
[   43.707472] type=1400 audit(1413801891.596:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2070 comm="apparmor_parser"
[   43.707805] type=1400 audit(1413801891.596:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2070 comm="apparmor_parser"
[  100.614740] systemd-hostnamed[2339]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[  207.709890] usbcore: registered new interface driver snd-usb-audio
[  307.622942] cannot get current value for control 2 ch 2: err = -22
[  312.618311] 4:2:1: usb_set_interface failed (-110)
[  317.613437] 4:2:1: usb_set_interface failed (-110)
[  322.608551] 4:2:1: usb_set_interface failed (-110)
[  327.603678] 4:2:1: usb_set_interface failed (-110)
[  332.598785] 4:2:1: usb_set_interface failed (-110)
[  337.593852] 4:2:1: usb_set_interface failed (-110)
[  342.588909] 4:2:1: usb_set_interface failed (-110)
[  347.584019] 4:2:1: usb_set_interface failed (-110)
[  352.579240] 4:2:1: usb_set_interface failed (-110)
[  357.574322] 4:2:1: usb_set_interface failed (-110)
[  362.569473] 4:2:1: usb_set_interface failed (-110)
[  367.564556] 4:2:1: usb_set_interface failed (-110)
[  372.559768] 4:2:1: usb_set_interface failed (-110)
[  377.554818] 4:2:1: usb_set_interface failed (-110)
[  382.549976] 4:2:1: usb_set_interface failed (-110)
[  387.545067] 4:2:1: usb_set_interface failed (-110)
[  392.540182] 4:2:1: usb_set_interface failed (-110)
[  397.535249] 4:2:1: usb_set_interface failed (-110)
[  402.530384] 4:2:1: usb_set_interface failed (-110)
[  407.529523] 4:2:1: usb_set_interface failed (-110)
[  412.524637] 4:3:1: usb_set_interface failed (-110)
[  417.519803] 4:3:1: usb_set_interface failed (-110)
[  422.514874] 4:3:1: usb_set_interface failed (-110)
[  427.510059] 4:3:1: usb_set_interface failed (-110)
[  432.505055] 4:3:1: usb_set_interface failed (-110)
[  437.500154] 4:3:1: usb_set_interface failed (-110)
[  442.495191] 4:3:1: usb_set_interface failed (-110)
[  447.490466] 4:3:1: usb_set_interface failed (-110)
[  452.485532] 4:3:1: usb_set_interface failed (-110)
[  457.480721] 4:3:1: usb_set_interface failed (-110)
[  462.475817] 4:3:1: usb_set_interface failed (-110)
[  467.470978] 4:3:1: usb_set_interface failed (-110)
[  472.466041] 4:3:1: usb_set_interface failed (-110)
[  477.461223] 4:3:1: usb_set_interface failed (-110)
[  482.456295] 4:3:1: usb_set_interface failed (-110)
[  487.451460] 4:3:1: usb_set_interface failed (-110)
[  492.446526] 4:3:1: usb_set_interface failed (-110)
[  497.441691] 4:3:1: usb_set_interface failed (-110)
[  502.436723] 4:3:1: usb_set_interface failed (-110)
[  507.431921] 4:3:1: usb_set_interface failed (-110)
[  512.430940] 4:2:1: usb_set_interface failed (-110)
[  517.426064] 4:2:1: usb_set_interface failed (-110)
[  522.421330] 4:2:1: usb_set_interface failed (-110)
[  527.416329] 4:2:1: usb_set_interface failed (-110)
[  532.411466] 4:2:1: usb_set_interface failed (-110)
[  537.406595] 4:2:1: usb_set_interface failed (-110)
[  542.401713] 4:2:1: usb_set_interface failed (-110)
[  547.396820] 4:2:1: usb_set_interface failed (-110)
[  552.391931] 4:2:1: usb_set_interface failed (-110)

